Proper Lubrication for Your Gear and Roller System

A non-lubricated gear and roller system is expensive to maintain and may fail sooner than expected. Proper lubrication can prevent early failure and reduce the coefficient of friction. Different types of lubricants have different properties, and the best choice for your gears and rollers is a high-quality oil that has the right viscosity to reduce friction. Without lubrication, your gears will wear down, causing damage to shafts and bearings. Thus, this site has more tips that will help you purchase the most suitable non-lubricated gears. 

Lubrication is the most effective way to prevent gears from failing. Most gear failures occur because the gears are not lubricated adequately. This can be due to the improper amount or type of lubricant. Inappropriate lubricant can also cause foaming or corrosion of the gears. The right lubricant should be chosen according to the type of gear and operating temperature. The American Equipment Manufacturers Association (AEMA) provides specific standards for the use of lubricants.

Self-lubricating gears are a popular alternative for industrial applications. They use a keyless retaining device and a non-metallic gear. A non-metallic gear has a non-standard tooth form, which reduces high-wear approach action. Non-metallic gears are generally made of plastic, including nylon 12, lauramid, nyaltron, and delrin. Phenolic composites are also an option for non-metal gears.

Grease lubrication is another popular option for low-speed, low-load applications. However, compared to oil, it provides less cooling and is not recommended for heavy-duty or continuous applications. Another important consideration when lubrication is grease is the amount of grease used. Too little grease can prevent adequate lubrication film from forming and too much grease can lead to excessive viscosity and power loss.  If you want to know more about this topic, then click here: https://en.wikipedia.org/wiki/Gear.